Cellulose-TiO2 nanocomposite with enhanced UV–Vis light absorption

TiO₂/N-cellulose nanocomposite was successfully prepared in the (cyclohexyl)hexyl-dimethylammonium acetate–dimethyl sulfoxide solution. The obtained composite was characterized with various techniques like UV–Vis/DR, FTIR/DRS, X-ray diffraction, thermogravimetric analysis, DLS method and BET SSA measurements. TiO₂/N-cellulose nanocomposite exhibited high UV–Vis light absorption with energy gap shifted to the visible region. Additive of TiO₂/N photocatalyst to cellulose-IL-DMSO solution leads to obtaining the material with higher thermostability and limited photoactivity.     

Biosorption of toxic metals using freely suspended Microcystis aeruginosa biomass

This paper describes the potential application of a freely suspended cyanobacterial biomass of Microcystis aeruginosa as a sorption material for toxic metals, cadmium (Cd) and lead (Pb) from aqueous solutions. In order to identify the most suitable conditions for removal of these elements (concentration range: 1–20 mg L^?1), the laboratory experiments were carried out during different incubation times (1–48 h) and under various temperatures (10–40°C), pH (5–9) and with or without light irradiance. Competitive biosorption of Cd and Pb was also investigated. We found that M. aeruginosa demonstrates high efficiency in removing both of the studied metals from aqueous solutions. Sorption of Pb occurred, however, more rapidly and effectively, and was less disturbed by changes in physico-chemical conditions. Under pH=7, 25°C and light, the removal rates after 3 h and 6 h of incubation, were 90–100% for Pb and 79.5–100% for Cd, respectively. The co-occurrence of the metals decreased the rate of metal biosorption. Pb was sequestered preferentially over Cd. From the results we conclude that freely suspended M. aeruginosa can constitute a promising low-cost, easy-producible biosorbent material for toxic metals in contaminated wastewater.      

Probiotic Yoghurts with Sea Buckthorn,Elderberry, and Sloe Fruit Purees

Elderberries, sea buckthorn, and sloe berries are fruits of wild-grown bushes, valued in folk medicine for their health-promoting properties but still rarely applied in food. The aim of the present study was to produce probiotic yoghurts with a 10% addition of sweetened purees prepared from elderberries (EPY), sea buckthorn (SBPY), and sloe berries (SPY) and to assess their chemical composition, acidity, content of polyphenols and anthocyanins, ferric reducing antioxidant power (FRAP) and antiradical power (ARP), level of starter microbiota, concentration of acetaldehyde and diacetyl, syneresis, instrumentally measured color and texture parameters, and sensory acceptance. The results were compared to those obtained for plain probiotic yoghurt (PPY) and the changes tracked during 1 month of cold storage at 2 week intervals. The addition of elderberry and sloe berries significantly increased the antioxidant capacity of probiotic yoghurts, probably due to a high content of polyphenols, especially anthocyanins. However, anthocyanins were more stable in the EPY when compared to the SPY. All yoghurt treatments were characterized by good sensory quality and viability of starter microorganisms, including probiotic strains during cold storage. Elderberries promoted the evolution of diacetyl in yoghurts during storage and, together with sloe berries, produced increased syneresis and the greatest changes in color profile compared to PPY.     

Effect of Filtrated Osmotic Solution Based on Concentrated Chokeberry Juice and Mint Extract on the Drying Kinetics,Energy Consumption and Physicochemical Properties of Dried Apples

Background: Filtration of osmotic solution affects selective penetration during osmotic dehydration (OD), and after drying is finished, this can influence the chemical composition of the material, which is also modified by OD. Methods: Osmotic dehydration was carried out in filtrated and non-filtrated concentrated chokeberry juice with the addition of mint infusion. Then, this underwent convective drying, vacuum-microwave drying and combined convective pre-drying, followed by vacuum-microwave finishing drying. Drying kinetics were presented and mathematical models were selected. The specific energy consumption for each drying method was calculated and the energy efficiency was determined. Results and Discussion: The study revealed that filtration of osmotic solution did not have significant effect on drying kinetics; however, it affected selective penetration during OD. The highest specific energy consumption was obtained for the samples treated by convective drying (CD) (around 170 kJ·g⁻¹ fresh weight (fw)) and the lowest for the samples treated by vacuum-microwave drying (VMD) (around 30 kJ·g⁻¹ fw), which is due to the differences in the time of drying and when these methods are applied. Conclusions: Filtration of the osmotic solution can be used to obtain the desired material after drying and the VMD method is the most appropriate considering both phenolic acid content and the energy aspect of drying.     

How to Obtain the Maximum Properties Flexibility of 3D Printed Ketoprofen Tablets Using Only One Drug-Loaded Filament?

The flexibility of dose and dosage forms makes 3D printing a very interesting tool for personalized medicine, with fused deposition modeling being the most promising and intensively developed method. In our research, we analyzed how various types of disintegrants and drug loading in poly(vinyl alcohol)-based filaments affect their mechanical properties and printability. We also assessed the effect of drug dosage and tablet spatial structure on the dissolution profiles. Given that the development of a method that allows the production of dosage forms with different properties from a single drug-loaded filament is desirable, we developed a method of printing ketoprofen tablets with different dose and dissolution profiles from a single feedstock filament. We optimized the filament preparation by hot-melt extrusion and characterized them. Then, we printed single, bi-, and tri-layer tablets varying with dose, infill density, internal structure, and composition. We analyzed the reproducibility of a spatial structure, phase, and degree of molecular order of ketoprofen in the tablets, and the dissolution profiles. We have printed tablets with immediate- and sustained-release characteristics using one drug-loaded filament, which demonstrates that a single filament can serve as a versatile source for the manufacturing of tablets exhibiting various release characteristics.     

纳米晶枝CuAu 合金催化剂对二氧化碳电催化还原性能的研究

利用可再生清洁能源将CO₂转化为CO和其他小分子是合成含碳燃料的可观方法之一。间歇性可再生能源存储的重要策略之一是将二氧化碳进行电化学还原。选择具有高活性和稳定性的电催化剂对于电化学还原CO₂至关重要。在这项研究中,我们使用简单的电沉积方法合成了具有纳米晶枝状结构的CuAu合金电极。各项表征显示原子比约为1:1的CuAu纳米枝晶对CO₂的电化学还原具有出色的催化活性。合成的主要产物是H₂和CO,这是合成气体是合成天然气,氨和甲醇合成的中间体。电化学阻抗谱（EIS）测量表明,相对于Cu和Au电沉积催化剂,CuAu纳米晶枝状催化剂具有相对低的电荷转移阻力。CuAu纳米枝晶催化剂是一种具有潜在的转化CO₂为合成气体的高活性电催化剂。     

Fundamental Characterization,Photophysics and Photocatalysis of a Base Metal Iron(II)-Cobalt(III) Dyad

A new base metal iron-cobalt dyad has been obtained by connection between a heteroleptic tetra-NHC iron(II) photosensitizer combining a 2,6-bis[3-(2,6-diisopropylphenyl)imidazol-2-ylidene]pyridine with 2,6-bis(3-methyl-imidazol-2-ylidene)-4,4′-bipyridine ligand, and a cobaloxime catalyst. This novel iron(II)-cobalt(III) assembly has been extensively characterized by ground- and excited-state methods like X-ray crystallography, X-ray absorption spectroscopy, (spectro-)electrochemistry, and steady-state and time-resolved optical absorption spectroscopy, with a particular focus on the stability of the molecular assembly in solution and determination of the excited-state landscape. NMR and UV/Vis spectroscopy reveal dissociation of the dyad in acetonitrile at concentrations below 1 mM and high photostability. Transient absorption spectroscopy after excitation into the metal-to-ligand charge transfer absorption band suggests a relaxation cascade originating from hot singlet and triplet MLCT states, leading to the population of the ³MLCT state that exhibits the longest lifetime. Finally, decay into the ground state involves a ³MC state. Attachment of cobaloxime to the iron photosensitizer increases the ³MLCT lifetime at the iron centre. Together with the directing effect of the linker, this potentially makes the dyad more active in photocatalytic proton reduction experiments than the analogous two-component system, consisting of the iron photosensitizer and Co(dmgH)₂(py)Cl. This work thus sheds new light on the functionality of base metal dyads, which are important for more efficient and sustainable future proton reduction systems.     

Elongation method with intermediate mechanical and electrostatic embedding for geometry optimizations of polymers

The elongation method with intermediate mechanical and electrostatic embedding (ELG-IMEE) is proposed. The electrostatic embedding uses atomic charges generated by a charge sensitivity analysis (CSA) method and parameterized for three different population analyses, namely, the Merz–Singh–Kollman scheme, the charge model 5, and the atomic polar tensor. The obtained CSA models were tested on two model systems. Test calculations show that the electrostatic embedding provides several times of decrease in the difference of energies of testing and reference calculations in comparison with the conventional elongation approach (ELG). The mechanical embedding is implemented in a combination of the conventional elongation method and the ONIOM approach. Moreover, it was demonstrated that the geometry optimization with the ELG-IMEE reduces the errors in the optimized structures by about one order in root-mean-square deviation, when compared to ELG.     

Multicomponent Peptide Stapling as a Diversity‐Driven Tool for the Development of Inhibitors of Protein–Protein Interactions

Stapled peptides are chemical entities in‐between biologics and small molecules, which have proven to be the solution to high affinity protein–protein interaction antagonism, while keeping control over pharmacological performance such as stability and membrane penetration. We demonstrate that the multicomponent reaction‐based stapling is an effective strategy for the development of α‐helical peptides with highly potent dual antagonistic action of MDM2 and MDMX binding p53. Such a potent inhibitory activity of p53‐MDM2/X interactions was assessed by fluorescence polarization, microscale thermophoresis, and 2D NMR, while several cocrystal structures with MDM2 were obtained. This MCR stapling protocol proved efficient and versatile in terms of diversity generation at the staple, as evidenced by the incorporation of both exo‐ and endo‐cyclic hydrophobic moieties at the side chain cross‐linkers. The interaction of the Ugi‐staple fragments with the target protein was demonstrated by crystallography.     

Degradation of Amino-(3-methoxyphenyl)methanephosphonic Acid by Alternaria sp

Alternaria sp. isolated from the surface of carrot ( Daucus carota ) seeds appeared to be able to degrade amino-(4-methoxyphenyl)-methanephosphonic acid using it as a sole source of carbon, nitrogen, and phosphorus for growth.